top of page

Spray Tips

teejet-1.png
wilger small.png

TEEJET SPRAY TIPS

(PRODUCT CATALOGUE)


 TT (Turbo Tee)

Large, rounded internal passage to minimize clogging. 15° attack angle for better canopy penetration. Substantially longer wear life. 

​

​

 XP (Boomjet Flat Spray)

Extra wide spray pattern - up to 5.5 meters - using a single nozzle. BSPT male threads.

​

​

 TTJ (Turbo TwinJet)

Dual outlet design produces two 110° flat fan spray patterns. The angle between each spray pattern is 60° forward and back. 

​

​

 XR (Xtended Range Flat Spray)

Reduces drift at lower pressures, better coverage at higher pressures. 

​

​

 AI (Air Induction Flat Spray)

Produces larger air-filled droplets through a Venturi air aspirator, more resistant to drift. 

​

​

 AIXR (Air Induction Xtended Range)

Produces air-filled droplets through a Venturi air aspirator.

​

​

 SJ3 (Multiple Solid Stream)

Excellent for application of liquid fertilizer. Features three solid streams of equal velocity and capacity, virtually eliminating drift. 

​

​

 OC (Off Centre)

Commonly installed in double or single swivel nozzle bodies. Because these bodies are adjustable for angular position, a wide spray swath is easily obtained. 

​

​

 TK (Wide Angle Flat Spray)

Recommended pressure range 1-3 bar. 

​

WILGER SPRAY TIPS

(PRODUCT CATALOGUE)

​

Ideal for Pulse Width Modulation spraying, which is a spraying system where the flow rate for individual nozzles is controlled by a pulsing solenoid at each nozzle. The solenoid shuts nozzle flow on and off up to 100 times per second, allowing PWM systems to maintain a constant pressure in the spray line irrespective of speed. Constant pressure maintains droplet size and spray quality over a range of speeds. 

​

 ER SERIES 

​​ER spray tips are typically used as a baseline for comparing drift reduction in other tips. They are ideal for applications which require fine coverage and are not very drift sensitive (i.e. Fungicides)​.

ER110-40 Wilger Nozzle

 SR SERIES 

​​The SR series tip-caps reduce ~50% of driftable fines compared with the same application with an ER series tip/cap. 

They are ideal for applications which require fine coverage, but require significant drift reduction (i.e. Contact Herbicides / Fungicides). 

SR110-40 Wilger Nozzle

 DR SERIES 

​​The DR series tip-caps reduce ~90% of driftable fines, compared with the same application with an ER series tip/cap. 

Typically coverage is maintained by using higher application volumes (i.e. Ground-applied and systemic Herbicides). 

DR110-40 Wilger Nozzle
nozzle.png
(B)1-4XP10L_2.jpg
TTJ60-110025VP_1.JPG
XR11004-VK_1.jpg
AI110025-VS_1.JPG
AIXR11003VP_1.jpg
SJ3-04-VP_1.JPG
OC-02_1.jpg
TK-50_1.jpg

TEEJET PARTS


 Caps, gaskets, regulating & shut-off valves, nozzle-bodies, filters and pressure relief valves & more. 

WILGER PARTS


 Nozzle-bodies, Wilger adapter caps (To suit Teejet & Agrifac), viton diaphragms, gaskets, nozzle strainers & more. 

B344BEC24S-C_2.jpg
AAB126ML-6-100-2.jpg
QJ363C-1-NYB-1.jpg
CP19438-EPR_1.jpg
23120a_1.jpg
QJ17560A-1-1.jpg
CP25611-3-NY_1.jpg
40204-00 Wilger adapter cap Wilger to Teejet
Sample_QN Setup_small_touched copy.png
40260-V0 Wilger viton oring
SR110-40 Combo Jet Wilger Nozzle
2015_Tip In hand copy.png
bottom of page